LAMI Revo-Flex vs FOLIANT Vega 400A Comparison

If you are comparing LAMI Revo-Flex and FOLIANT Vega 400A, the main question is not which laminator is “better”. It is which machine fits your workflow, production volume, installation environment, and support requirements.

This guide compares the two machines by the factors that affect day-to-day operation: workflow, output, sheet and material requirements, installation, maintenance, and local support.

Key takeaways

• LAMI Revo-Flex and FOLIANT Vega 400A are designed for different production environments.
• Revo-Flex is easier to compare for compact, automated laminating workflows where trimming, simple operation, and installation flexibility matter.
• FOLIANT Vega 400A is easier to compare for higher-output B3+ lamination where larger formats, heavier stock, and production-line requirements matter.
• For buyers, the final decision should also include compliance documentation, film supply, maintenance access, local service, and spare parts availability.

Quick comparison: LAMI Revo-Flex vs FOLIANT Vega 400A

LAMI Revo-Flex and FOLIANT Vega 400A are both business laminators, but they fit different production environments. This quick comparison focuses on the differences that matter most when shortlisting a machine.

Decision point	LAMI Revo-Flex	FOLIANT Vega 400A
Production fit	Compact fully automatic lamination for common sheet sizes and recurring business work	Compact industrial in-house lamination for higher-volume digital and offset output
Format range	SRA3, A3, A4, B4, B5, and A5, with a maximum lamination width of 320 mm	Sheets from 20 × 30 cm up to 38 × 66 cm
Output scale	190–550 A4 sheets/hour in bordered, waste-free mode	Over 2,100 B3 portrait sheets/hour, with speed up to 18 m/min
Material fit	60–240 g/m² paper and dedicated films from 38–150 μm	115–500 g/m² paper, BOPP films, and Nylon films with optional pneumatic separation
Installation requirements	Approx. 70 kg, compact setup, CE Marking	Industrial setup with integrated compressor; no external pressured-air source required

What to know about LAMI Revo-Flex

Lami Corporation: a laminator-centred manufacturer based in Japan

LAMI Revo-Flex is a model from Lami Corporation, a Japan-based company that develops and sells laminators and related products. Its official product lineup includes the LAMI Revo Series, LAMI Cold Series, LAMI Hot Series, Leon Series, and laminate film.

Within that lineup, Revo-Flex is part of the LAMI Revo Series, which is presented as a fully automatic laminator series designed to make laminating work simpler and more efficient.

Revo-Flex: compact automation in the LAMI Revo series

Revo-Flex is the high-end model in the LAMI Revo fully automatic laminator series. It is built for businesses that want compact automation, including operation from feeding to cutting and four-side trimming, without moving into a larger industrial laminating line.

It supports common formats such as SRA3, A3, A4, B4, B5, and A5, with a maximum lamination width of 320 mm. Buyers should check whether its supported sizes, dedicated film system, trimming function, and output range match their daily workload.

LAMI Revo-Flex specifications

Maximum width	320 mm
Maximum processing speed	700 to 2,000 mm/min, variable
Supported film thickness	38 μm / 80 μm / 100 μm / 125 μm / 150 μm
Warm-up	Approx. 5 minutes
Power supply	CE: AC230V / 1,000W

What to know about FOLIANT Vega 400A

FOLIANT: a laminator brand for offset and digital print finishing

FOLIANT Vega 400A is a model from FOLIANT EU s.r.o., whose product range is organised around offset and digital lamination in B1, B2, and B3 formats. The Vega 400A sits in the B3 category, which FOLIANT describes as machines constructed for digital outputs, with B3+ working formats and suitability for outputs from popular digital printers.

Vega 400A: compact industrial B3+ lamination with integrated compressor

FOLIANT Vega 400A is described as a compact industrial laminating machine for heavy-duty digital output lamination. It is also suitable for high-volume B3+ offset printed sheets, with automatic feeding, controlled overlaps, high-speed separation, and industrial film handling.

Vega 400A is a closer match for buyers who need B3+ production capacity, heavier paper stock, and a production-line-oriented setup. Unlike systems that require an external compressed-air source, Vega 400A includes an integrated compressor inside the machine frame.

FOLIANT Vega 400A specifications

Maximum sheet size	38 × 66 cm
Maximum processing speed	Up to 18 m/min
Supported film thickness	BOPP films: 24–42 μm Nylon films: 24–35 μm with optional pneumatic separation
Warm-up	Shorter than 10 minutes
Air supply	Integrated compressor; no external pressured-air source required

Workflow fit: compact automation vs compact industrial production

Revo-Flex: compact automation for recurring lamination work

LAMI Revo-Flex fits workflows where the goal is to reduce manual handling for recurring lamination jobs in common sheet formats. Its role is not only to laminate, but to simplify the process from feeding to cutting, with trimming included in the finished workflow.

This makes Revo-Flex easier to assess for teams that need automated lamination without planning for a larger industrial production line.

FOLIANT Vega 400A: compact industrial setup for heavier in-house production

FOLIANT Vega 400A fits a different operating profile. It is designed for heavier in-house lamination of digital and offset outputs, with feeding, overlap control, separation, and pneumatic pressure built around a more industrial production setup.

For buyers, the practical question is not which workflow is more advanced. It is whether the current operation needs a compact automated laminating process, or a higher-output B3+ setup with industrial feeding, separation, and film handling.

Volume and speed: A4 automation vs B3+ high-output production

Revo-Flex: output for repeated A4 and common-format work

LAMI Revo-Flex is listed at 190–550 A4-size sheets per hour in bordered, waste-free mode. Its lamination speed ranges from 700 to 2,000 mm/min, with approximately 9 sheets per minute at the 2,000 mm/min setting as a theoretical value.

These figures make Revo-Flex easier to assess for recurring lamination work in A4 and other common formats, especially where automation and trimming are part of the workflow. Buyers should compare the listed output with their actual daily workload, not just the highest speed setting.

FOLIANT Vega 400A: higher listed output for B3+ production

FOLIANT Vega 400A is listed with a maximum speed of up to 18 m/min and performance of more than 2,100 B3 portrait sheets per hour. This places it in a different output range from Revo-Flex, especially for buyers working with larger sheets and higher-volume digital or offset output.

The practical question is whether that level of speed is needed and whether the site can support the production setup around it. Higher listed output matters most when the wider workflow — feeding, staffing, space, film supply, and downstream handling — can keep pace.

Sheet size, paper weight, and film compatibility

Revo-Flex: common formats and dedicated film options

LAMI Revo-Flex supports common business and print-shop formats, including SRA3, A3, A4, B4, B5, and A5, with a maximum lamination width of 320 mm. It is compatible with 60–240 g/m² paper and dedicated films in 38, 80, 100, 125, and 150 μm thicknesses.

This makes Revo-Flex easier to check against workflows built around standard documents, menus, cards, printed sheets, and other recurring jobs in familiar formats. Buyers should also confirm that the dedicated film system matches their preferred film supply and finishing requirements.

FOLIANT Vega 400A: larger sheets, heavier stock, and industrial films

FOLIANT Vega 400A supports sheets from 20 × 30 cm up to 38 × 66 cm and laminates 115–500 g/m² paper. It is designed for BOPP films from 24–42 μm; Nylon films from 24–35 μm can be laminated with optional pneumatic separation.

This makes Vega 400A easier to check against workflows that involve larger B3+ sheets, heavier paper stock, and industrial film use. Buyers should confirm not only the maximum format, but also the sheet sizes, paper weights, and film types used most often in daily production.

Setup, installation, and maintenance considerations

Revo-Flex: lighter installation and accessible maintenance

LAMI Revo-Flex is listed at approximately 70 kg, with a compact machine profile and CE Marking. Its warm-up time is approximately 5 minutes at 100°C, although this can vary depending on ambient conditions and temperature settings.

For maintenance, Revo-Flex uses an easy-access open mechanism that makes the inside of the machine easier to clean. Buyers should also note that Revo-Flex requires dedicated film, so film availability and supply terms should be checked before installation.

FOLIANT Vega 400A: industrial setup with integrated compressor

FOLIANT Vega 400A has a larger industrial installation profile than Revo-Flex, but it includes an integrated compressor inside the machine frame. This means the machine does not need an external pressured-air source for its pneumatic pressure system.

This can simplify one part of the installation checklist, but buyers should still confirm floor space, power supply, operator access, maintenance clearance, film supply, and local technical support before treating it as a direct alternative to a more compact laminator.

Choose LAMI Revo-Flex if...

Consider LAMI Revo-Flex if your operation mainly handles common sheet sizes and needs a compact way to automate recurring laminating work.

• You mainly work with common formats such as SRA3, A3, A4, B4, B5, and A5.
• You want to reduce manual handling from feeding to cutting.
• You need trimming included in the finished workflow.
• You prefer a compact installation profile over a larger industrial laminating setup.
• You can use the required dedicated film system.
• You want to check whether the listed output range matches your daily production volume.

Before moving forward, confirm that Revo-Flex matches your paper range, film supply, trimming needs, installation conditions, and expected workload.

Choose FOLIANT Vega 400A if...

Consider FOLIANT Vega 400A if your operation needs higher-output in-house lamination for digital or offset production, especially with larger sheets and heavier paper stock.

• You need to handle B3+ or larger-format production work.
• You regularly laminate heavier paper stock.
• You need higher listed throughput for digital or offset output.
• Your workflow requires industrial feeding, overlap control, and separation.
• You prefer an industrial machine with an integrated compressor rather than an external pressured-air setup.
• You can plan for film supply, operator access, maintenance space, and local technical support.

Before moving forward, confirm that the production environment around the machine can support the laminator, not only that the laminator meets the headline specifications.

Buyer checklist before requesting a quote

Before requesting a quote for LAMI Revo-Flex or FOLIANT Vega 400A, confirm the requirements that most directly affect installation, operation, and support.

• Target installation site
• UKCA, CE, or other required compliance documentation
• Power supply requirements
• Available floor space and machine access
• Integrated compressor or external air requirements
• Expected daily or monthly production volume
• Common sheet sizes and paper weights
• Required film types and film supply route
• Local service coverage
• Spare parts availability and lead time

Compare laminators by production requirements

LAMI Revo-Flex and FOLIANT Vega 400A serve different production needs. Revo-Flex is easier to compare for compact automated workflows, while Vega 400A is easier to compare for higher-output B3+ lamination.

Before narrowing your choice, compare fully automatic laminators by the requirements that affect daily operation: workflow, output volume, sheet size, material compatibility, installation conditions, and support.