Automatic Laminator Hub » Automatic Laminator Comparison Guide » KOMFI Amiga 36 vs D&K Europa PB

KOMFI Amiga 36 vs D&K Europa PB

Index

KOMFI Amiga 36 and D&K Europa PB are fully automatic laminators designed for different production requirements.

Amiga 36 focuses on compact-format lamination, flexible feeding and optional finishing functions. Europa PB is designed for B2 sheets and double-sided lamination in a single pass.

The right choice depends on sheet size, one- or two-sided production, typical run length, installation requirements and the availability of local support.

Key takeaways

Choose KOMFI Amiga 36 for smaller sheet formats, varied short-to-medium runs and flexible finishing options.
Choose D&K Europa PB for B2 production and double-sided lamination in one pass.
Both machines reach a listed maximum speed of 20 m/min in specified configurations.
Amiga 36 is smaller and lighter, while Europa PB handles wider, heavier and longer sheets.
European buyers should confirm installation, training, spare-parts availability and service coverage before requesting a quotation.

KOMFI Amiga 36 vs D&K Europa PB at a glance

Comparison point	KOMFI Amiga 36	D&K Europa PB
Main application	Flexible automatic lamination for smaller sheet formats	Automatic B2 double-sided lamination
Lamination workflow	Primarily single-sided lamination with optional finishing functions	Double-sided lamination in one pass; one station can be switched off for single-sided work
Maximum listed speed	20 m/min with feeding head; 15 m/min with vacuum feeder	Up to 20 m/min
Maximum standard sheet size	360 × 700 mm	540 × 740 mm
Extended sheet options	Up to 1,016 or 1,060 mm in specified configurations	Optional lengths of 880, 950 and 1,050 mm
Minimum sheet size	200 × 200 mm	205 × 220 mm
Paper range	115–350 g/m²	115–400 g/m² recommended range
Film range	24–50 microns	25–42 microns
Feeding	Top-feeding head or bottom suction feeder	Deep-pile suction feeder
Controls	Colour touchscreen, presets, diagnostics and internet service connection	Centralised PLC controls; optional Industry 4.0 functions
Machine weight	332 or 360 kg, depending on feeder	900 kg for the PB/EL range
Power requirement	6 kVA	Three-phase, 400 V, 12.0 kW
European support route	KOMFI headquarters in the Czech Republic and an Austrian branch office	D&K Europe in Redditch, United Kingdom

What is KOMFI Amiga 36?

KOMFI Amiga 36 is a compact automatic laminator for sheets from 200 × 200 mm to 360 × 700 mm. Extended feeding configurations are available for longer sheets.

Buyers can choose between a top-feeding head and a bottom suction feeder. The bottom-feeding option keeps the original sheet order unchanged, which may be useful for collated or sequential work.

The machine also includes operator-focused functions such as job presets, overlap control, automatic pressure and temperature detection, diagnostics and an internet connection for service support.

Source: KOMFI Official Website
https://www.komfi.cz/en/amiga-36-en/

KOMFI Amiga 36 specifications

Specification	KOMFI Amiga 36
Maximum production speed	20 m/min with feeding head; 15 m/min with vacuum feeder
Maximum standard sheet size	360 × 700 mm
Extended sheet length	Up to 1,016 or 1,060 mm in specified configurations
Minimum sheet size	200 × 200 mm
Paper weight	115–350 g/m²
Film types	OPP, PET, Nylon and PVC
Warm-up time	Approximately 3–5 minutes
Sheet-overlap accuracy	±1 mm
Power supply	6 kVA
	Machine weight	360 kg with feeding head; 332 kg with vacuum feeder

Optional configuration and finishing functions

Available options include a bottom suction feeder, extended feeding table, film slitter, additional perforator, Teflon pressure roller, roll lift and air-cushion delivery.

KOMFI also lists integrated or external OTF effect foiling. PSA film capability is available with the integrated OTF configuration. Buyers should confirm which options are required and included in the quotation.

What is D&K Europa PB?

D&K Europa PB is a fully automatic B2 laminator developed for double-sided production. It uses two separately controlled laminating stations to apply the same finish to both sides of a sheet in one pass.

One laminating station can be switched off when only one side requires lamination, allowing the machine to support both single- and double-sided workflows.

Its B2 format, deep-pile feeder and two-station configuration make it particularly relevant to photobook, print-on-demand and commercial print production using digital or lithographic output.

Source: D&K Official Website
https://www.dkeurope.co.uk/products/europa-pb-double-sided-laminator/

D&K Europa PB specifications

Specification	D&K Europa PB
Maximum production speed	Up to 20 m/min
Maximum sheet size	540 × 740 mm
Minimum sheet size	205 × 220 mm
Maximum laminating width	530 mm
Film range	25–42 microns
Temperature range	70–140°C
Electrical requirement	Three-phase, 400 V, 12.0 kW
Machine weight	900 kg for the PB/EL range

Feeding and delivery functions

Europa PB includes a deep-pile suction feeder, missing-sheet detection, lateral film adjustment, a scrolled infeed roller and an adjustable de-curl bar.

A perforator, adjustable burster, air-supported delivery system and adjustable catch tray support continuous sheet processing and delivery.

Which laminator better fits each workflow?

Choose KOMFI Amiga 36 if...

You mainly process sheets up to 360 × 700 mm.
Your workload includes varied short-to-medium runs.
You want a choice of top- or bottom-feeding systems.
Job presets, diagnostics and remote service connectivity are important.
You may need effect foiling or other optional finishing functions.
A smaller and lighter machine is more suitable for the available production area.

Choose D&K Europa PB if...

You regularly process B2 sheets.
Double-sided lamination in one pass is a core requirement.
You produce photobooks, print-on-demand covers or two-sided commercial work.
You need to process stock up to 400 g/m².
A deep-pile feeder is required for longer runs.
Your facility can support the machine’s size, weight, electrical supply and dry-air requirements.

Installation requirements

The two machines require different levels of installation planning.

Amiga 36 weighs between 332 and 360 kg and requires a 6 kVA power supply. Europa PB is listed at 900 kg for the PB/EL range and requires three-phase 400 V power, 12.0 kW and a dry-air supply.

Before placing an order, confirm floor loading, delivery access, operator clearance, ventilation, electrical connections and compressed-air capacity.

European sales and support considerations

Sales and after-sales support should be checked early when comparing KOMFI Amiga 36 and D&K Europa PB for a European installation. Both manufacturers publish direct contact routes in Europe, but public contact details do not automatically confirm local on-site coverage, response times or warranty handling in every country.

Supplier	European location	Sales contact	Service / technical contact	Spare parts / engineering contact
KOMFI	Headquarters: Dvorakova 1001, 563 01 Lanskroun, Czech Republic Austria branch: Weidlinger Strasse 17/20, 3400 Klosterneuburg, Austria	sales@komfi.cz +420 737 230 439	service@komfi.cz +420 737 230 408	parts@komfi.cz +420 465 352 704
D&K Europe	38-39 Crossgate Road, Park Farm, Redditch, Worcestershire, B98 7SN, United Kingdom	UK sales: uksales@dkeurope.co.uk Outside UK sales: exportsales@dkeurope.co.uk +44 (0) 1527 520 073	Main telephone: +44 (0) 1527 520 073	Engineering: engineering@dkeurope.co.uk Fax: +44 (0) 1527 524 056

CHECK

Compare Fully Automatic Laminators for Your Production Needs

KOMFI Amiga 36 is designed for smaller formats, flexible feeding and varied short-to-medium runs, while D&K Europa PB focuses on B2 sheets and double-sided lamination in one pass.

Explore other automatic laminators by sheet size, production volume, finishing process and installation requirements to find the right fit for your workflow.

Compare Fully Automatic Laminators

Buyer checklist before requesting a quotation

Prepare the following information before contacting a supplier:

Your typical and maximum sheet sizes
Whether you require single- or double-sided lamination
Your regular paper weights and film types
Your average run length and monthly sheet volume
Any need for B2 or long-format production
Required finishing options, including effect foiling or PSA film
Available floor space and delivery access
Available power and compressed-air services
The country in which the machine will be installed
Installation, training, service and spare-parts arrangements
Required compliance documents, including CE or UKCA records where applicable
Lead times for the machine, options, film and service parts

Final comparison

KOMFI Amiga 36 is suitable for smaller-format production, frequently changing jobs and businesses that value feeding flexibility, software functions and optional finishing upgrades.

D&K Europa PB is the more suitable option when B2 capacity and double-sided lamination in one pass are the main purchasing requirements.

The final decision should be based on representative job samples, installation readiness and confirmed after-sales support—not specification figures alone.

[By production scale]
Three Fully Automatic Laminators

When choosing a fully automatic laminator, it is important to base your decision on the volume you process in a day rather than the size of the main unit or equipment scale.
This is an introduction to fully automatic laminators that match the workload and operational style of different production scales.

[About 100+ sheets per month]
Small-lot production

GBC Foton 30
(ACCO Brands Corporation)

Image Source: ACCO Brands Corporation Official Site
(https://www.gbc-machines.com/products/gbc-foton-30-automatic-laminator)

Example facilities

Schools, hospitals, municipalities, etc.

Reasons for recommendation

Automates small-scale operations with fewer personnel

With the push of a button, automatically laminates 30 sheets of A4 paper in 15 minutes. Its size allows it to be placed on a desk, making it easy to install.
By fully automating the process from feeding to lamination, it enables the handling of jobs with low daily processing volumes in parallel with other operations.
The fact that it does not require dedicated operators or subsequent processes makes it suitable for small-scale sites.

Maximum processing speed	7.0 m/min
Maximum width	297 mm (A3 compatible)
Warm-up	about 4 minutes
Processing type	roll type, double-sided (with borders)
Voltage (CE)	AC220 to 240V
Main unit dimensions	W 580 mm / D 440 mm / H 250 mm

View details on the official website

[About 1,000+ sheets per month]
Medium-lot production

Revo-Flex
(Lami Corporation)

Image source: LAMI Corporation Official Website
(https://www.lami-corporation.co.jp/english/products/detail/51)

Example facilities

Output centers, design offices, franchise headquarters, etc.

Reasons for recommendation

High-mix, fast-turnaround jobs are efficient through process reduction

Completes trimming simultaneously with lamination, eliminating the need to move to subsequent processes or separate equipment.
Eliminates bottlenecks that tend to occur in on-demand printing and production sites.
High-precision automatic four-side trimming reduces trimming errors resulting from manual work, reducing film loss and the hassle of reprinting.
Even at sites with high-mix, small-lot production, it processes efficiently with consistent quality.

Maximum processing speed	2.0 m/min
Maximum width	320 mm (SRA3 standard)
Warm-up	about 5 minutes ^*1
Processing type	roll type, double-sided (border on/off selectable)
Voltage (CE)	AC230V
Main unit dimensions	W 1,300 mm / D 610 mm / H 1,080 mm ^*2

View details on the official website

[10,000+ sheets per month]
High-lot production

Mini 76 TH
(Autobond Laminating)

Image source: AUTOBOND Official Website
(https://www.autobondlaminating.com/machinery/thermal-lamination/mini/mini-76-th/)

Example facilities

Printing factories, bookbinding lines, etc.

Reasons for recommendation

High-speed, continuous processing that can be integrated into mass-production lines

Uses a steel side plate with a thickness of 20 mm described as sturdy like a tank. This rigid structure physically eliminates vibrations even at high-speed operations of 60 m per minute, maintaining stable processing accuracy.
With a processing capacity of 60 m per minute, it can continuously handle large-format prints stably.
It demonstrates its true value when introduced as a part of a production line rather than as a standalone machine.

Maximum processing speed	60.0 m/min
Maximum width	760 mm (B1+ compatible)
Warm-up	inquire for details
Processing type	roll type, single-sided or double-sided (borderless)
Voltage (CE)	inquire for details
Main unit dimensions	inquire for details

View details on the official website

*1. At 100°C (212°F) setting
*2. Dimensions when assembled, including the stand, tray, etc.